AQUABOT TURBO T-JET: AUTOMATIC ROBOTIC CLEANER VACUUMS ANY POOL IN 1 HOUR OR LESS!
Just drop it in and press a button! No hoses to mess with, costly booster pumps to run or filter connections needed.
The Ecojet Turbo uses AquaProducts patented Power Washing Jet technology. Uniquely different from all other conventional cleaners, the Ecojet Turbo has a high-pressure impeller on top of the pump motor that directs water through tubes directly to the pools floor to power-wash and loosen stubborn sand and debris from crevices to be vacuumed into the large intake valves located under the pool cleaner.
By simply directing water flow, the Aquabot Turbo TJET does more than any other pool cleaner! At a rate of up to 4800 gallons per hour, the Aquabot Turbo TJET vacuums and filters out large leaves, twigs, sand, algae and bacteria directly into the pool cleaners internal microfiter bag. Uniquely different from all other conventional cleaners, the Aquabot Turbo TJET has a high-pressure impellar on top of the pump motor the directs water through tubes directly to the pools floor to powerwash and loosen stubborn sand and debris from crevices to be vacuumed into the large intake valves located under the pool cleaner.
With Aquabot Turbo T-JET you get:
• Complete cleaning of ANY pool in half the time
• Hydro-Scrubbing Jet system loosens stubborn debris
• Offset vacuum ports for clog-free operation
• Largest capacity reusable filter – more debris with less cleanings
• Industry’s healthiest filtration and water circulation
• Convenient pool cleaning at the touch of a button
• Best warranty and support network in the industry
• Maintenance cost savings of up to 50% (chemicals, water, energy)
• The EcoJet Pro does a great job cleaning and climbing all pool surfaces
• including side walls with up to a 60 degree gradual sloping incline.
|Quantity of Water Filtered:||5100 Gallons per Hour|
|Cleaning Coverage:||5000 Sq. Ft / Hr.|
|Electrical Cord Length:||51 ft.|
|Unit Weight:||16.9 lbs.|
|Reset Switch:||Manual (To prevent accidental restart)|
|Operating Cost:||1 Kilowatt Hr. per 6 Hours Approximately 10¢ Per Use|
|Electrical Plug:||115v / 60Hz|
|Filtration - Micron Rating:||Self Contained, Down To 2 Microns|
|Scrubbing Ability:||Heavy Duty - All Types|
Power Washing Jets:
Hydro scrubbing power-washing jets
|Shipping Dimensions||17.5" x 17.5" x 19.5"|
|Shipping Weight:||36 lbs.|
Aquabot Turbo climbs 90 degree inclines from floor to waterline, including most stairs and benches, to automatically clean pools up to 50' in length in just 4 hours or less. Aquabot Turbo is even equipped with an adjustable timer for customized cleanings and can operate with auto-controller systems. Compare Aquabot Turbo to any other cleaner and see why it outperforms everything else!
Additional Accessories Not Included: Aquabot Buggy
Aquabot Turbo utilizes state-of-the-art microprocessor technology in cooperation with a multitude of sensors to completely clean pools as large as 50' long, regardless of their surface type, in a mere 4 hours or less. No wonder Aquabot Turbo is the world’s #1 selling robotic pool cleaner. Designed with you in mind, Aquabot Turbo offers you the convenience of complete pool cleaning – floor to waterline and everywhere in between – at the mere touch of a button. Aquabot Turbo cuts your total pool maintenance bills (chlorine, electricity, water, etc.) by up to 50%, and helps your wallet further, and the environment, by saving thousands of gallons of chlorinated water through the reduction of evaporation and main pool filter cleanings as much as 80%. Having its own built-in motors and filtration system Aquabot Turbo operates completely independent of the pool's filtration system, eliminating the need for sloppy, tangling hoses and costly to operate booster pumps, as well as decreasing pool filter usage and wear up to 60%. Simply plug it in, drop it in and press a button. The days of $100 yearly pool cleaner repairs are over as Aquabot Turbo is engineered for reliable, worry-free operation, having less than 10 moving parts and cannot become stuck on stairs or ladders. Here’s what else you get with Aquabot Turbo.
Scrubbing Action - Aquabot Turbo's front and rear rotating scrubbing brushes loosen and remove heavy dirt and fine particles from floor, walls and waterline to be vacuumed and trapped in its own internal microfilter bag.
Vacuuming - Aquabot Turbo's exceptionally high suction power and large vacuum intake ports enable it to easily vacuum up all types of dirt and debris.
Built-in Filtration System - Aquabot Turbo will clean and purify thousands of gallons of water per hour. Aquabot Turbo is equipped with an expansive, reusable microfilter bag that has the capacity to hold many leaves and twigs and is capable of filtering out all types of fine particles including sand, silt, algae and bacteria. The filter bag is easily removed and rinsed clean.
Better Chemical Distribution - As a result of Aquabot Turbo's heavy-duty pumping action, the pool’s bottom and surface water are circulated, raising the overall water temperature which reduces heating costs and creating a more even distribution of chemicals which normally settle to the pool floor.
No Installation - Operation is as simple as dropping Aquabot Turbo into your pool, plugging it into its low voltage transformer and pushing a button. It does the rest by itself. Aquabot Turbo is the safest and easiest cleaner to use, and costs on average about 10¢ a day to run.
Low maintenance - Constructed of corrosion-proof materials, with fewer than 10 moving parts, Aquabot Turbo requires little or no maintenance.
Free Educational DVD - Every Aquabot Turbo comes complete with a DVD to show you how pool cleaning can be accomplished at the touch of a button.
Technical Specifications Sheet
|Aboveground = AG
In Ground = IG
||All Surface Types / Configurations|
|Pool Size(maximum size):||Up to 50' Long|
|Cleaning Time (most pools):||1 Hour|
||3 Years / 200 Cycles Prorated|
|Timer Auto Shut-Off:||2 Hours Digital / External Timer System Capable|
|Debris Intake Ports:||2 Offset; clogless operation / Customizable; 1" x 5" to 1.5" x 5"|
|Suction Port Depths:||Customizable; 3 Depths for Deep Pore, Corner and Seam Cleaning|
|Port Velocity Adjustments:
||Yes; Increases Vacuum Thrust for Difficult Sand, Silt and Algae Removal|
|Filtration Particulate Size
|Down to 2 Microns; For the Healthiest Water|
|Filter Max Debris
|34 Quarts Volume|
|Forward / Reverse Timer:||Adjustable 1 to 90 Seconds|
|Raised Surface Obstacle Avoidance:||Never Stuck™ Rollers|
|Cable Length / Diameter:||50' Long 1/2" Diameter Thermoplastic Rubber|
Patented Hydraulic Jet Propulsion
|Drive Tracks:||None Needed|
|Guidance Mechanism:||Directional Guidance Axle|
Handle Locking Positions (waterline movements)
Free Spinning, Non-Marring Wheels
|Cleaning Sq. Ft. Per Hour:||6800|
High Performance, Brushless / Sealed; Oil Cooled and Lubricated + Water Cooled
Filtration / Circulation Rate: Gallons Per Hour:
|4800 Gallons Per Hour|
|Cleaner Weight:||10.75 lbs.|
|Operating Voltage:||24v AC|
|Hydro Scrubbing Mechanism:||Patented Power Wash / HydroScrubbing|
|Power Supply:||StayCool™ All Weather Resistant|
|ETL listed to UL Standards:||Yes: Entire Product Cleaner, Cord, Power Supply|
|Operating Cost:||<5¢ / Cleaning|
|Elec. Requirments:||110v / 60Hz|
|Cleaner Dimensions:||17" x 20" x 11 ¾"|
|Packaging Dimensions:||L: 19 9/16" x W: 18 3/16" x H: 17.5"|
|Shipping Weight:||35 lbs.|